Varjo Aero Installation Instructions


The adapter for the left and right are marked with an L and R on their outer side respectively. To install each side follow the following steps:
  1. Align the outer side first.
  2. Then press the inner side down until the adapter snaps into place.
  3. Make sure that the side towards the nose is aligned properly.
  4. Double check that both the bottom and top are properly attached by slightly pressing them down individually.


Slightly press the adapter inwards from the outside while lifting the inner top part of the adapter up.

You'll find another uninstall variation below. Use the one that works best for you.

Rotate the the lower inner (nose part) outwards and then lift the adapter up.